If your toilet refuses to unclog, you might be wondering what you can do to clear it. There are a few solutions to this problem. Before you try them, you should first check the drain thoroughly. If you can see water flowing out, you can use a plunger. But if you cannot find the obstruction, you can also try a wire coat hanger to remove the clog. To use this method, wrap the wire coat hanger with duct tape and push it down the drain. A wire coat hanger can clear the drain obstructions within a few inches of the clogged drain. You can also twist it to maneuver it into the gutter.
If the clog is caused by toilet paper, you can use a plunger. It would help if you bought a heavy plunger to avoid spills. Make sure to wear rubber gloves so that you won’t end up with a wet hand. Insert the plunger’s rubber part into the toilet bowl and push it slowly toward the bowl. Repeat this process several times. If the toilet doesn’t unclog, try using an enzyme cleaner, vinegar, and baking soda. Avoid using feminine care products in the bathroom as they may cause clogs.
To unclog a toilet that has a stubborn sludge, use a potent chemical agent. A combination of dish soap and household bleach works effectively against these organic materials. Be careful, though: hot water can harm your plumbing system. While boiling water is not ideal for cleaning pipes, it should be hot enough to loosen the waste and prevent further clogs.
Call a plumber if you’ve tried everything to unclog the toilet and haven’t yet gotten a clear view of the problem. The plumber will come and check your system and fix the problem. If the clog is caused by a leak in your main drain pipes, you may have to call a plumber for help. The plumber can also provide you with helpful advice on how to shut off the water supply in the system safely.
A combination of hot water and white vinegar can help unclog a toilet. Use a small amount to prevent overflow. After the solution has been added, wait 20 minutes for the mixture to fizz. Then add hot water to flush the toilet bowl. After a few minutes, it should clear up the clog. If it doesn’t work, you can try a chemical cleaner.
Another simple way to unclog a toilet is to use vinegar and baking soda. A half gallon of water will dissolve the clog quickly. However, it would help if you used a large enough container to push it through the clog. If this doesn’t work, you may consider calling a plumber for help. There are many solutions to a clogged toilet that require minimal plumbing expertise.